MRCOOL Hyper Heat 2nd Gen 24K BTU, 2 Ton, 18.3 SEER2 Heat Pump Condenser and Ducted Air Handler (CENTRAL-24-HP-230B00-O)

MRCOOL Hyper Heat 2nd Gen 24K Complete System

Bring heating and cooling to a central ducted home with the MRCOOL Hyper Heat 2nd Generation 2-ton split system. SKU CENTRAL-24-HP-230B00-O combines the outdoor heat pump, matching multi-position indoor air handler and MRCOOL smart thermostat. It uses R-454B refrigerant and variable-speed inverter technology.

What's Included

• Outdoor condenser: CENTRAL-24-HP-C-230B00-O.
• Indoor air handler: MVP-24-HP-MUAH-230A00-O.
• MRCOOL Smart Thermostat for central-system control.

Sold separately: refrigerant line set and optional auxiliary electric heat kit. The manufacturer's brochure identifies flare-connection stub pipes and copper nuts as included. Installation materials and electrical work depend on the application.

Features

• Variable-speed DC inverter operation adjusts output to changing heating and cooling demand.
• Side-discharge condenser with a painted galvanized-steel cabinet.
• Air handler supports upflow, downflow, horizontal-left and horizontal-right installation.
• Slide-out blower and self-diagnostic display simplify service access.
• Optional compatible R-454B No-Vac Quick Connect line sets and electric heat kits.

Specifications

• System SKU: CENTRAL-24-HP-230B00-O
• UPC: 840255589208
• Nominal size: 24K class / 2 ton
• Rated cooling / heating capacity: 23,000 / 24,000 BTU/h
• Published efficiency: Up to 18.3 SEER2; 11.7 EER2; 10.0 HSPF2, Region IV
• Refrigerant: R-454B
• Outdoor electrical supply: 208/230V, 60Hz, single-phase
• Outdoor minimum circuit ampacity / maximum fuse: 19A / 20A
• Air-handler supply: 115/208/230V, 60Hz, single-phase; verify installation configuration
• Liquid / suction connection: 3/8 in. / 3/4 in.
• Condenser dimensions, W × D × H: 35.04 × 13.46 × 26.50 in.
• Condenser net weight: 102.29 lb
• Air-handler dimensions, W × D × H: 21.02 × 17.52 × 45.00 in.
• Air-handler net weight: 105.6 lb
• Filter size: 16 × 20 × 1 in.

Performance values follow MRCOOL's 2nd-generation brochure for the matched 24K combination. Final equipment selection, load calculation, electrical protection, clearances and duct design must follow the unit nameplates, current manuals and applicable codes.

Installation & Warranty

This is an R-454B central ducted system. Traditional refrigerant-line installation requires a licensed HVAC professional. An optional approved No-Vac line set does not remove electrical, code or site-specific requirements. Use a qualified electrician for electrical work and follow the current installation manual.

MRCOOL's limited warranty lists ten years of compressor, parts and labor coverage for the original owner, subject to its terms. The installing company is responsible for the first 90 days of labor; manufacturer labor coverage begins on day 91. Exclusions include freight, routine maintenance, diagnostics and refrigerant. Review the full warranty below.

Manuals & Downloads

• Installation & owner's manual: VersaPro / Hyper Heat R-454B (PDF)
• Hyper Heat 2nd Generation brochure and specifications (PDF)
• Detailed performance tables (PDF)
• Central Ducted Hyper Heat limited warranty (English / French PDF)
• MST04 smart thermostat installation & owner's manual (PDF)
• Optional VersaPro / Hyper Heat heat-kit manual (PDF)
• Manufacturer 24K Hyper Heat support, certification and document links
• Manufacturer 24K air-handler support and compatible accessories